The easiest way to eliminate any local or EPA environmental concerns is to treat your wash water. The VSD system will remove sufficient oils, greases and solids to meet the discharge limits for acceptable discharging into the sanitary sewer system. The VSD systems are designed for washing cars, trucks, buses, equipment and other vehicles with sand, dirt, oil, and other commercial/industrial surface layers.

How Does the VSD System Work?

The VSD Series pre-treatment system automatically turn on when the wash water storage tanks reaches a certain level. It incorporates an extremely efficient patented filtration process utilizing fully automated solids filtration and activated carbon (GAC) polishing filtration. All features of the system are designed and constructed to insure superior performance and minimal operating maintenance and materials.

STANDARD FEATURES:

• High-Efficiency Self-Priming Filter Pump
• Multi-Stage / Multi-Pass Filtration
• Solids Filtration
• Carbon Polishing Filter
• Low Operating & Maintenance Costs
• Minimal Service Attention

OPTIONAL FEATURES:

• Pre-and post-filtration for heavy solids removal
• Corona discharge ozonation system
• PLC control with remote monitoring
• Complete system enclosure
• Oil content monitor and alarm
• pH control system
• U.L. Listing

4-Vessel Filter System

Why Do I Need a Re-Cyke® VR System?

The easiest way to reduce your water costs is to reduce your fresh water usage. Recycling wash water also eliminates EPA and local impact fees, reduces sanitary sewer costs, and water restrictions. VR Heavy-Duty systems are designed for washing cars, trucks, buses, equipment and other vehicles with sand, dirt, oil, and other commercial/industrial surface layers.

How Does the Re-Cyke® VR System Work?

The Re-Cyke® VR Recycling System pulls the used wash water through the gravity separation system to initially remove some solids, free oils, greases, and waxes. The water is then pumped through multiple solids and polishing filters. The water’s flow is injected with ozone gas for constant bacteria destruction and odor elimination. The treated water is constantly recirculated in a storage tank and re-pressurized for reuse upon demand.

STANDARD FEATURES:

Zero Discharge Systems

• High-Efficiency Self-Priming Filter Pump
• Corona Discharge Ozonation System
• Multi-Stage / Multi-Pass Filtration
• Solids Filtration to 5 Microns
• Pressurized Carbon Polishing Filter
• High Efficiency Repressurization Pump
• Auto-Backwashing Filters
• Low Operating & Maintenance Costs
• Minimal Service Attention

OPTIONAL FEATURES:

• Can be configured with existing oil/water separators
• Available in partial reclaim or total closed loop configurations
• PLC control with remote monitoring
• Complete system enclosure
• Modular systems up to 500 gpm
• ORP / pH control system
• U.L. Listing

VR SERIES SYSTEM SPECIFICATIONS

Click here to review the Above Ground Oil Water Separator flow process and design.

The SPT Series Integrated Sewer Pretreatment Systems have been specially designed for treating wash water from commercial and industrial washing operations. These heavy-duty stainless steel systems integrate an oil water separator with an inclined plate clarifier to remove solids, floating oils and odors from the waste stream so you can either reuse the water or discharge to the sanitary sewer.

Applications:

• Heavy Equipment Washing
• Aircraft Maintenance
• Truck & Bus Washing
• Forklift Wash Facilities
• Military Bases
• Locomotive Washing
• Marinas

Designed for treating wash water from commercial and industrial washing operations.

Benefits:

• Low Maintenance
• Stainless Steel Construction
• 99% Removal of oil droplets
• No chemicals or filters to replace
• Ozone generator for odor control
• Two-year Warranty

Case Study: Sewer Pretreatment Systems

• Case Study of SPT Series system
  to be processed before discharge to the sewer. [ read full study ]

This cost-effective system will help satisfy local, state, and EPA environmental requirements as well as reduce water usage and operating costs. We offer a range of sizes and auxiliary wash equipment that can be engineered for your particular application.

SPT Series System Component Brochure- PDF

Leasing or Rental Options Available

The RPS Series Reclaim System is for in-bay automatic car washes. Recycling wash water reduces your fresh water usage as well as eliminates EPA and local impact fees, reduces sanitary sewer costs, and water restrictions. Our RPS systems are designed for petroleum industry car washes.

How Does the RPS System Work?

The RPS Series reclaim system pumps water through automated filters and an ozone injector system to clean and disinfect the water. The cleaned water is stored and constantly re-circulated to remain odor-free for delivery to the car wash upon demand. Filters automatically purge solids to eliminate the need for manual cleaning. The system requires minimal periodic maintenance. It is ideal for retrofitting existing car washes as a turnkey package with compact water storage tanks installed along the wash bay wall or in an adjacent room.

STANDARD FEATURES:

• Totally Automatic Operation
• Multi-Stage / Multi-Pass Filtration
• Large volume Ozone Odor Control
• Automated Fresh Water By-Pass
• Narrow System Footprint
• High-Efficiency Pumps
• Low Maintenance Costs
• U.L. Listing

OPTIONAL FEATURES:

• PLC Controller with Remote Monitoring
• Final Filtration down to 5 Micron
• PLC control with remote monitoring
• Compact Water Storage Tanks
• Submersible Pump
• Total Turnkey Packages
• Custom Painted or SS Enclosure

RPS SERIES SYSTEM SPECIFICATIONS

Why do I need the CRS Series Rinse Water System?

Most recycling systems can provide filtered wash-quality water. The CRS-Series systems are designed to further treat that water to remove soaps and some dissolved solids to provide water for rinsing the vehicles. This will reduce the amount of fresh water needed for the vehicle washing operation.

Top Features:

• Rinse-Quality Water Filtration
• Automatic Filter Operation
• Retrofit To Existing Or New Recycling Systems

How does the CRS Series Rinse Water System Work?

The CRS-Series rinse water systems are designed to provide rinse-quality water on demand from an automated or manual vehicle wash operation. When needed, the CRS filter pump draws water from the recycled wash water storage tank and pushes it through a deep-bed polishing filter to the rinse process. A pressure switch and tank system assure constant output pressure. The filter automatically backwashes and requires minimum maintenance.

Optional Features:

• Odor Control Ozonation System
• Remote Monitoring
• Filtration Pre-Treatment
• System Enclosure
• Water Storage Tank
• U.L. Listing

Standard Features:

• Totally automatic filtration
• Deep-bed Carbon Polishing Filter
• Compact Frame Mounted System
• High Efficiency Pressurization Pump
• Installs With Any Recycling System
• Minimal Maintenance Required

CRS SERIES RINSE WATER SYSTEM SPECIFICATIONS

Typical Installation for a CRS Series Vehicle Rinse Water System